Wood Router Maintenance

Video Transcript

Hi, my name is Kevin and on behalf of Expert Village I'm going to show you a little bit about care for your router. When you're done with your router for the day, same with most tools, it's a really, really good idea to blow off all the excess dust out of the machine. It's really easy for dust to get worked up in there into the moving parts and you really don't want that. You want that as clear as possible so this machine can run really really well. Another thing that you want to do is to wax the bottom of this so that when you're routing, you get nice smooth movement over the wood. So you want to keep this bottom waxed really well. For your router bits, as you can see. There is a lot of buildup on this and that's pitch from the wood. Woods like pine are really resinous so they can really build up with gunk. So what you want to do is you want to get some oven cleaner from the store or hardware stores will often sell bit cleaner, and put that on there and let it eat away at that and then get a toothbrush and scrub it out and do that. That way you're getting nice smooth, sharp edge on the bits and it isn't gunked up with all this resin and pitch.

Watch these related videos

• 
  Wood Router Maintenance

  playlist Views: 494

• 
  Routering a Woodworking Project

  playlist Views: 639

• 
  Firewalls & Port Forwarding With Bit Torrents

  playlist Views: 3,962

• 
  Types of Router Bits to Use for a Plunge Router

  playlist Views: 2,257

• 
  Care & Maintenance for Fixed Base Power Routers

  playlist Views: 1,849

• 
  Types of Router Bits

  playlist Views: 656

Community Members who...

• Favorited this Video
• Rated This Video

Thumbs up or Thumbs down? Be the first to rate this video!

Top Tags