Using Sealant to Finish Your Light Switch Cover

Video Transcript

Hi! I'm John and I'm from expertvillage.com. We have put the glitter on the light switch plate cover. You don't have to put glitter on, so skip that step if you don't like. When it's set and done and dried, it's still going to be flat. Remember the Mod Podge will dry clear, but it won't be glossy. It'll just be flat. Let's put some on here. You can make it as glossy as you want. Finish coat. This goes over pastel. You can put it on anything to make it shine up. Let's put it on. Depending on how glossy you want it. You only want to put on one coat or 5 coats. You don't want to drench it because then it'll start to drip, so do one coat at a time. Just be patient. It'll look better that way. Again, when you do it, you don't want to blast it. Keep it away and just do even strokes. Shake it. It's coming out and let's go for it. Get it from all different angles. So and so forth. If we want to do it anymore than this, let it dry, then put some more on. That's all we're going to do for today. We're going to let it dry and we'll put it on.

Watch these related videos

• 
  Using Sealant to Finish Your Light Switch Cover

  playlist Views: 717

• 
  Sealants for Making a Light Switch Plate Cover

  playlist Views: 616

• 
  Drying the Picture on a Light Switch Cover

  playlist Views: 666

• 
  Using Mod Podge to Glue the Picture on the Light Cover

  playlist Views: 976

• 
  Doing the Final Cut for a Light Switch Plate Cover

  playlist Views: 602

• 
  How to Clean Up After Making the Light Switch Cover

  playlist Views: 533

Community Members who...

• Favorited this Video
• Rated This Video

Thumbs up or Thumbs down? Be the first to rate this video!

Top Tags