Replace Pods on Pool Vac Ultra

Video Transcript

Okay we've discussed replacing the pods and now that we've got the A frame in they need to move something and that's going to be these right here. These are your pods. Double check that you've got good ones, well you can buy new ones, but make sure that the springs are springy and with the shoes here, that there is a little bump that you can feel. Now these are right and left specific and again they have provided you with it being embossed a little bit a left and a right. What we are going to do is put this forward and again too it does say rear and forward and we're going to set it like this and like we've discussed before it is noticed on one side and on this one so we are going to wiggle it into place. Do that on both sides. Here we've got our little friend the hex screw so we are going to remove the Phillips top on the drill, place these right in here and again making sure your torque is on its lowest setting, set it right home. Again here inside, beautiful and now we have almost got the whole truck on the lower assembly.

Watch these related videos

• 
  Replace Pods on Pool Vac Ultra

  playlist Views: 642

• 
  Hayward Pool Vac Ultra

  playlist Views: 2,480

• 
  Replace Shoes on Pool Vac Ultra

  playlist Views: 854

• 
  Replace Wings for Pool Vac Ultra

  playlist Views: 687

• 
  Troubleshoot the Pool Vac Ultra

  playlist Views: 1,523

• 
  Remove A Frames of Pool Vac Ultra

  playlist Views: 707

Community Members who...

• Favorited this Video
• Rated This Video

Thumbs up or Thumbs down? Be the first to rate this video!

Top Tags