How to Adjust the Truss Rod on a Bass Guitar

Viewing videos requires the latest version of Adobe's Flash Player.
Get the latest Flash player.
Showing 1-5

Part of the video series: How to Setup a Fender Bass

Summary: Adjust the truss rod on a bass guitar by looking down the neck at the frets and using an allan wrench; learn how from our expert bass guitar repair specialist in this free instrument maintenance video on Fender guitars.

Views: 4,918 | Tags: bass, guitar, strings, set, up, neck, fender, setup, bass guitars, guitar maintenance


About the Expert

The Ferrett The Ferret has worked as a guitar repair professional for over five years and has played guitar professionally himself for over 30 years.
His expertise e... read more

Conversations About This Video

  • Comments
    (2 comments)
  • Questions & Answers
    (0 questions) (0 answers)
by RickD76

This is a great series for a newbie like me! Thanks for the great info, Ferret!

Ferret, another concise and clear video series on the guitar...thanks from keibafan.

Have a question about this video topic? Ask our community members and let them share their knowledge with you!
Ask A Question

Video Transcript

How to Adjust the Truss Rod on a Bass Guitar

THE FERRET: This is the Fender Precision Bass, which is pretty much the industry standard. It's pretty stripped down to mostly the basics. You got one pickup, one volume, one tone control, bridge with adjustable saddles, and the truss rod adjustment is right up here at the end of the neck. The first thing we're going to do is we're going to check the neck because we can't really intonate it and do the action until we know the neck is straight. So what you want to do is you want to sight the neck from the end of the headstock looking down the edge of the fretboard and what we're looking for is to see that if the neck is straight or not, or if it has a hump in it, or if it's bowed. I'm looking at this neck right now; it looks like it is actually bowed, and that means that it's kind of got a flex in it like that. So what we need to do is we need to bring that up so it's flat. What we do is we use the right size Allen wrench, which just goes right in the hole here. And once we know it's in place, we're going to give it about a quarter turn to the right, which is going to make the fretboard come up to a flat plane. And there's a lot of string tension on this neck, so it's going to need another quarter turn, and sometimes you might have to loosen the string to get that wrench over where it needs to be. There we go. One more quarter turn. It's starting to look nice and straight. You want to look at both sides to the neck 'cause sometimes, you'll get a little bit different reaction from one side or the other. And this is looking pretty good, maybe just a little bit more, and then we're going to tune it back up to pitch and check the neck again.

Bass Ads

Community Members who...

  • Favorited this Video
  • Rated This Video

Check out what people are watching now
left_arrow right_arrow