How to Make a Wire Wrap Scroll

Video Transcript

Hi, my name is Nicole and today we’re going over the basics of wire wrapping and making jewelry, and now I’m going to show you how to make a scroll. You can use about two inches of wire. And you’ll want to cut a couple of pieces that are about the same size so that your scrolls are about even. And you’ll need your chain nose. And basically what you do is grip the wire and make a little loop just at the end, like so. And then take your flat nose and loop around the loop that you’ve made. And these don’t have to be perfectly tight. Just keep rotating it until you’re about halfway down the wire. On the other side, you do it the opposite direction. So I’m going to turn the loop away from me, like so. And then, again, rotate the wire around the loop. And you can tighten it as much as you like. So that’s a scroll, and what you want to do after you make the scroll is you’ll need a mallet and a surface to flatten the scroll on. And you just want to hit it a couple of times until the wire lengthens, basically. And that will just flatten the sides of the scroll and you can use it as a link. Another good idea when you’re making scrolls is to take steel wool and rub it against the grain of the silver to remove some of the polish and it makes a nice effect if you’re using faceted or darker beads because it accents them. And that’s how you make scrolls.

Watch these related videos

• 
  How to Make a Wire Wrap Scroll

  playlist Views: 11,543

• 
  Basic Tools Used for Wire Wrap Jewelry

  playlist Views: 10,022

• 
  How to Add a Dangling Charm to Your Gothic Bracelet

  playlist Views: 300

• 
  How to Make Your Own Wire Wrap Earrings

  playlist Views: 13,848

• 
  How to Make a Wire Wrap Necklace

  playlist Views: 11,109

• 
  Wire Wrap Jewelry Design

  playlist Views: 12,607

Community Members who...

• Favorited this Video
• Rated This Video

Top Tags