How to Remove an Old Front Shock

Video Transcript

DOUG JENKINS: Hi, I'm Doug. I work with 20 great guys in St. Louis at Doug Jenkins Custom Hot Rods and we're going to do some work for you today on Expert Village. So, since we have the front of the car taken apart, things are easy to get to. We're also putting shocks on the front. [PH] Mark's loosening the two bolts that hold the bottom of the shock in place. They're like the top of the rear shock. They have two bolts that hold it. They usually have a slot in them so that you can adjust them pretty easily. The shocks in the front are not the limiting factor in the travel of the spring so Mark doesn't have to support the front end. He's--they have bump stops up under the control arm that will care of that. There's a couple of ways you can do this job. It's really hard to get a nut loose on a shock. All it wants to do, because of the rust, is turn the shock around and around in circles. So, you get the vise grips and you put that on there and then you get a torch and you heat it up or you just get a really long extension and go back and forth eight times and you break that sucker off. Getting old shocks off is a real hassle. Mark is taking the easy way here. It's a little bit boring to watch him go back and forth like this but it beats the heck out of the torch and vise grips and welding wrenches on there and all the other tricks that we know.

Watch these related videos

• 
  Removing a Thermostat Housing Bolt

  playlist Views: 683

• 
  How to Remove Car Axles

  playlist Views: 1,861

• 
  How to Remove Car Shock Upper Bolts

  playlist Views: 1,312

• 
  How to Clean Thermostat Housing

  playlist Views: 556

• 
  How to Attach an Engine to an Engine Hoist

  playlist Views: 1,761

• 
  How to Remove Wheels on a Car

  playlist Views: 560

Community Members who...

• Favorited this Video
• Rated This Video

Thumbs up or Thumbs down? Be the first to rate this video!

Top Tags