




What you’ll want to do is cut off the water to the supply line as we’ve demonstrated before, and remove the supply line. So, to remove the old one, all you do is loosen the nut at the bottom to which the supply line was connected. That’s the only thing holding the refill valve in place. And you lift it out, change it out, and here’s the one that goes in its place.
Now, the only components to this are the tube which goes in. And then once it goes through under the tank, you’re going to put this lock nut in place and tighten it as much as you can by hand, and then with a pair of pliers, give it an extra turn or two to secure it in place. And then, after that, you put the little one washer in the bottom, and then this over the top, which is the supply line connection.
You’ll then reconnect this tube to the over-flow tube, and you’re set.
Expert: Greg Lim is a professional handyman and residential property manager. In the seven years he’s been a contractor, he has fully renovated two houses. Read More



























































