Viewing videos requires the latest version of Adobe's Flash Player.
Get the latest Flash player.
Get the latest Flash player.
Summary: Learn how to install roofing panels around a stack pipe in this free roofing instruction video.
Views: 1,830 | Tags: diy, construction, house, install, metal, steel, roofing, stone-coated, roof
About the Expert
Tom Shean Tom Shean has been in the Construction Industry for more than 12 years. read more
Comments
Questions & AnswersHi, I'm Tom Shean and today on behalf of Expert Village I'm going to show you how to install a metal roof. This produces the most universal and efficient method while providing good and long term performance. Panels are cut to provide a 1/2 inch of clearance around the pipe to allow for movement. Cut the flashing one size under the pipe diameter. The flashing can then be form fitted and set in a solid bed of allmet caulking. It can then be stitch screwed to the panel maximum 2 inches on center. The panel is cut to fit over the stack, again allowing for movement. A standard neoprene or a metal jack flashing is then placed over. A short piece of panel is cut with a slightly larger hole to counter flash a jack flashing. The next course of panel can now be laid through. For aesthetic purposes we recommend painting or coating the exposed stack end flashes.
Email this video to a friend
Ask A Question
