How to Frame Counter Battens

Viewing videos requires the latest version of Adobe's Flash Player.
Get the latest Flash player.
Showing 1-5

Part of the video series: How to Roof a House

Summary: Learn how to frame counter battens to make roof tiles flush in this free roofing instruction video.

Views: 1,004 | Tags: diy, construction, house, install, metal, steel, roofing, stone-coated, roof


About the Expert
Contact: allmet.com

Tom Shean Tom Shean has been in the Construction Industry for more than 12 years. read more

Conversations About This Video

  • Comments
    (0 comments)
  • Questions & Answers
    (0 questions) (0 answers)
Be the first to comment on this video.
Have a question about this video topic? Ask our community members and let them share their knowledge with you!
Ask A Question

Video Transcript

How to Frame Counter Battens

Hi, I'm Tom Shean and today on behalf of Expert Village I'm going to show you how to install a metal roof. Minimum 1x3 counter battens are run vertical and centered over existing rafters. A moisture membrane of felt Tri Flex or ice and water shield is placed horizontally with proper lap to allow the membrane to loop over the counter battens. The main framing and details are then continued. Care must be taken to protect the membrane from penetrations. All cuts and penetrations should be sealed with tape. In a situation where you work from the top down or where there is a back set fascia you will need to telescope the lowest course under the next full course of tiles. In order to hold the panels in plain, you will need to install a filler strip to support the back of the first course in lieu of the batten, usually a 1 inch wide board will suffice.

Building & Remodelin... Ads

Community Members who...

  • Favorited this Video
  • Rated This Video

Check out what people are watching now
left_arrow right_arrow