Viewing videos requires the latest version of Adobe's Flash Player.
Get the latest Flash player.
Get the latest Flash player.
Summary: Learn how to make hand signals when piloting a glider in this free flying video.
Views: 2,235 | Tags: online, flying, airplane, pilot, glider, sailplane, aircraft, gliders, sailplanes
About the Expert
Gene Franklin Gene Franklin is a FAA Certified Glider Flight Instructor, and has logged more than 1000 hours as flight instructor since 1974. SEL experience includes over 4... read more
Comments
Questions & AnswersHi! My name is Gene; I'm glider flight instructor on behalf of Expert Village. We can't really depend always on radios and you can't communicate audibly because of the noise of the airplane engines and the distances involved, so almost everything is done by universal hand signals. Same signals are used all over the world by all glider pilots, and it's a standard everybody has to learn before they start flying. We're ready to hook up the tow line now. We use the visual and audio signals. Open means I'm opening the release. Closing slowly; that gives him a chance to attach the rope to the glider. Okay, now we're connected. The next step is to tighten the rope between the tow plane and the glider, and then we'll be ready to launch. As soon as the rope is tight, we'll close the canopy and run our check list to make sure that we're ready to fly. Our checklist is a simple a, b, c, d. A is altimeter; B is belts and harness; C cable, canopy, and controls; D is dive brakes closed and locked; E is emergency plan. We're ready to go. I give a thumbs up to the wing runner. He checks for traffic. Lifts the wing for me. And then we fan the rudder back and forth as a signal for the tow pilot to go, and he will fan back showing he's ready. There's his signal. Now we're ready to launch. He'll fly first. As soon as we're off the ground he'll fly and then we follow him up. You can see his wings on this horizon.
Email this video to a friend
Ask A Question
