How to Install Car Window Tint to the Inside of Your Automobile Window

Video Transcript

Hello! My name is Ron Sanders of Personal Touch Custom Auto World. This is my assistant Sean Whitlock, and on behalf of Expert Village, we will now apply the film to the window, a roll up window to be exact. The first and most important thing is you have to remove the protective liner, which is clear plastic. Sean uses the razor blade to the side of the film technique, and slowly peels back the film. As you can see, he’s spraying the soap solution not directly in a stream into the film. That prevents you from knocking any dirt or debris onto the laminated surface. Once you peel away this plastic liner, this surface is very sticky, so you want to keep it wet to prevent dirt and dust from sticking to it. It also allows you to slide it into place once you put it on the glass. Now, he applies the tint by putting it in the center first, and sliding it in as close to all of the edges as possible without having the film laying over. You want it close to the edge, but you don’t want it over the edge. If it’s over the edge, that’s what causes the tint to peel. Once he has is stationary, he does one swipe of the squeegee, which causes the tint to begin stick. He’s using a blue max squeegee. This is actually a newer tool from when we first started tinting. This actually makes it easier. You can apply more pressure and it gives you a cleaner pull of the squeegee. After using that squeegee, he then uses a blue paper towel wrapped around a regular hard card. What this does is it one; protects you from scratching the film, and two; it actually cleans the film at the same time, and three; this paper towel catches any excess water that is under the film. After applying the top surface, he then lifts up the bottom, sprays the soap solution under the tint again. He gets a razor blade and cleans it to make sure there is no debris under there. You can never spray too much water; that just ensures that you’re getting rid of all of the dirt and making sure that the tint will slide into place. By this being a roll up window, it’s important that you make sure that the window is completely rolled up. In most cars without a frame, this door window automatically goes up when the door is completely shut. As you can see now, he’s just tucking the molding and squeegees all of the water from behind the tint down into the window channel. This concludes installing the film on the inside of a roll up window.

Watch these related videos

• 
  How to Install Car Window Tint to the Inside of Your Automobile Window

  playlist Views: 32,756

• 
  Prepping Car Windows for Window Tint

  playlist Views: 26,450

• 
  Tools Used for Car Window Tinting

  playlist Views: 21,232

• 
  How to Use the Chiseler to Install Car Window Tint

  playlist Views: 11,568

• 
  How to Install Car Window Tint on Stationary Glass on Your Vehicle

  playlist Views: 19,949

• 
  How to Install Car Window Tint to the Back Window

  playlist Views: 18,340

Community Members who...

• Favorited this Video
• Rated This Video

Thumbs up or Thumbs down? Be the first to rate this video!

Top Tags