Sport Bike Tail Section Removal

Video Transcript

Okay in this section we already got everything loose. Now it's time to go ahead and pull off our back tail. So we're just going to slide it straight back. And there's also our rear brake light. We're going to have to unplug that so don't yank it all the way off yet. But we're going to stop when it gets loose and we can see it, we're going to unplug that and then we can pull off the whole section and then we'll be able to get to our under tail. We also still have to do our under piece down here. We have a aftermarket part that's put on this bike that covers it up and makes it nice and clean so we're also going to have to take that section off in the next part. Okay so go ahead and start back here and wiggle it forward. And we're going to check and make sure there's not any bolts that we missed. Okay so we're just going to pull it back and up. Okay you want to be very careful with this section. You don't want to crack it. Instead of pulling it back I was able to pull it straight over and then now I'm going to pull it back. Okay so the rear brake light, it's right in here. Okay it's going to look like that. So we're just going to go ahead and disconnect that by pulling it forward and pulling it out. Okay don't just yank it out. There are little clips in here. You're going to pull that forward so don't yank it out because it's a special lock. And that should release our tail section and we should be able to pull it right out now. Alright and let's go ahead and finish pulling it off. Being very careful that we don't want to scratch it. It's painted. They have special after market paint on it. There we go. There we've got the whole back tail section off and there's our light and there's our brake lights that we disconnected. Alright everything looks good. Go ahead and set this down in a nice safe place so it doesn't get ruined.

Community Members who...

• Favorited this Video
• Rated This Video

Thumbs up or Thumbs down? Be the first to rate this video!

Top Tags