Removing Sway Bar When Changing Front Coil Springs on a Ford Taurus

Video Transcript

In this step, I'm going to demonstrate the proper service procedure for unbolting your sway bar link from the sway bar. This here is your sway bar and this here is the link from the top of the strut down to the sway bar itself. What we have to do is work on the nut behind it. I'm going to use a universal style wrench and my quarter inch drive socket wrench with an 8mm. I'm just going to take and work it back and forth, like so, unscrewing the bolt. As you can see the sway bar link is plastic and you?re going to want to be real careful with these guys. They're about $20 a shot, so if you can avoid damaging them, its best to. Go ahead and undo it the rest of the way by hand and slide the sway bar link out from the sway bar. Just like so. Right there. I'm going to go ahead and place our retaining nut in the magnetic tray for later re-installation. That is the proper service procedure for unbolting your sway bar link from the sway bar.

Watch these related videos

• 
  Removing Sway Bar When Changing Front Coil Springs on a Ford Taurus

  playlist Views: 1,525

• 
  Reassembling Sway Bar When Changing Front Coil Springs on a Ford Taurus

  playlist Views: 985

• 
  Compressing Coil Spring When Changing Front Coil Springs on a Ford Taurus

  playlist Views: 1,423

• 
  Removing Strut When Changing Front Coil Springs on a Ford Taurus

  playlist Views: 1,840

• 
  Reassembling Coil Spring When Changing Front Coil Springs on a Ford Taurus

  playlist Views: 1,517

• 
  Unbolting Brake Hose When Changing Front Coil Springs on a Ford Taurus

  playlist Views: 1,120

Community Members who...

• Favorited this Video
• Rated This Video

Thumbs up or Thumbs down? Be the first to rate this video!

Top Tags